Skip to main content

PIN for PC-Based Room System Devices

Use the following process to onboard a PC-Based Room and all connected peripherals using the PIN onboarding method.

Onboard a New Room with All Connected Peripherals​

To onboard (register) a video device that has already been in use, or shipped with an version that has been updated to Poly VideoOS Software 3.2 or later.
Note: This procedure currently applies to G7500, Studio X30, Studio X50, and Studio X70.

  1. Connect your device to a monitor and to the network.
  2. Enter the IP address of the device in a browser and login to the System Web Interface of the device.
    Note: If this is the first time in the device, enter the default username and password displayed, and update if required.
  3. On the System Web Interface of the device, go to Servers > Cloud.
  4. Copy the Registration Key.

G7500 Web Interface

  1. Open Poly Lens in a separate tab (lens.poly.com).
  2. In Poly Lens, go to Manage > Register Device > Register a single device.
  3. Enter the Registration Key copied earlier, into the Device PIN field.
    Note: This PIN is a one-time use code, so if you delete a device and want to add the device to Poly Lens again, reboot the device to generate a new PIN.
  4. Enter the device information to register.
  5. Select Register Device.